Qubino Z-Wave Plus Smart Mini Dimmer ZMNHHD3, No Neutral Wire Needed (Z-Wave Hub Required)

Qubino Z-Wave Plus Smart Mini Dimmer ZMNHHD3, No Neutral Wire Needed (Z-Wave Hub Required)

    Features:

  • Z-Wave dimmer: requires a Z-Wave hub for wireless control of connected lighting. Qubino Mini Dimmer will calibrate to work with your specific type of bulb – from LEDs, fluorescent, halogen to incandescent bulbs. No matter what type of bulb you’re using, Mini Dimmer will bring a maximum amount of dimming range. Max load: 65 W of LED bulbs (90 W for incandescent).
  • Works without neutral: The 2-wire installation system is very common in the electrical wiring of older homes. Thanks to Qubino Mini Dimmer these can be turned into smart homes as efficiently as new houses.
  • No minimum load required: With Mini Dimmer, you can connect and remotely control low wattage bulbs. There is no minimum load power required
  • The smallest Z-Wave dimmer: No matter how small, shallow, crowded or stuffed with electrical cables, Mini Dimmer will fit smoothly in any flush mounting box. Reduce assembly time and installation expenses, install it fast and easy behind a classic switch.
  • Sustainable product: Qubino Mini Dimmer consumes the least electricity in the dimmer community, only 0,4W. Qubino packaging is made of 0% plastics, we only use carton material that can be recycled.

QUBINO Flush ZMNHBD3 Z-Wave 2 relays – the smallest double relay switch

QUBINO Flush ZMNHBD3 Z-Wave 2 relays - the smallest double relay switch

    Features:

  • 2-IN-1: Control 2 different loads (set of lights) individually via Z-Wave (compatible controller required, sold separately).
  • SAVE SPACE: This module will fit in the most crowded switch box. It’s the best choice for double and triple gang boxes.
  • SAVE MONEY: Use just one Qubino module to automate 2 different light switches. It installs behind your existing wall switches so you can keep your favorite style and spend less on equipment. Works great with LED’s!
  • BONUS FEATURES: Reports status instantly and monitors energy use for each load. Features a built-in timer so you can set your lights and devices to turns off automatically even if your Internet is down.
  • MAKES THINGS EASIER: Auto-inclusion for quick and convenient installation. Restores on/off status after power failure. Works well with any type of mechanical wall switch (toggle and decora style, will NOT work with dimmers and electronic switches). NEUTRAL WIRE REQUIRED.

Qubino Z-Wave Plus Smart On/Off Thermostat 2 ZMNKID3 (Z-Wave Hub Required)

Qubino Z-Wave Plus Smart On/Off Thermostat 2 ZMNKID3 (Z-Wave Hub Required)

    Features:

  • SMART ON/OFF HVAC CONTROL: NEW improved version officially supported by SmartThings! Add Z-Wave to your electric water heater, floor heating, electric radiators, or a hot water pump (compatible Z-Wave hub required, sold separately). Turn your hearing and cooling equipment on or off from your smart home app, Z-Wave remote control, scene controller, or a simple wall switch.
  • EXTREME TEMPERATURE REPORTS: The included 3-foot digital sensor will send accurate temperature data to your Z-Wave hub. It’s the widest reporting range for any Z-Wave temperature sensor: -58 – 257 F.
  • POWER IQ: Use it with 110-230 VAC electric heating systems and to monitor ambient temperature or connect the module to 24 VDC to get notifications about temperature drops in your pool or aquarium.
  • DIVERSE INSTALLATION: It’s so small, it will easily fit behind any wall switch for convenient local control. The module adds to your system through auto-inclusion making the set-up quick and easy!
  • EXTRA FEATURES: Advanced configuration is available for expert users with open Z-Wave systems (parameter setting input required). THIS MODULE IS NOT SUPPORTED BY WINK, PIPER, OR ALARM PANELS (ADT Pulse, Vivint, Honeywell, Simon XT, and others).

Qubino Z-Wave Plus Universal Relay with Dry Contact Switch ZMNHND3

Qubino Z-Wave Plus Universal Relay with Dry Contact Switch ZMNHND3

    Features:

  • WHAT DOES IT DO? Install it behind your push-button garage opener switch, or at the low-voltage installation for your fireplace, or any dry contact circuit to get on/off Z-Wave control and status updates to your smart home hub.
  • WHAT ELSE DO I NEED? Check for NEUTRAL wire in the switch box (VERY IMPORTANT) if connection to 120VAC. If powering the relay by 24 VDC, you’ll need a separate power supply. You’ll need a compatible Z-Wave hub to use this device (scroll down for details), like SmartThings, Vera, or Home Center Lite. Does NOT work with Wink or alarm panels. Alexa is NOT a Z-Wave hub.
  • DIVERSE INSTALLATION: It’s so small, it will easily fit in any location and can be paired with a momentary or on/off wall switch for convenient local control. The relay adds to your system through auto-inclusion making the set-up quick and easy!
  • EXTRA FEATURES: Advanced configuration is available for expert users with open Z-Wave systems (parameter setting input required). THIS RELAY IS NOT SUPPORTED BY WINK, PIPER, OR ALARM PANELS (ADT Pulse, Vivint, Honeywell, Simon XT, and others).
  • IS THERE TECH SUPPORT? Yes! You can always contact the seller or manufacturer for help with wiring or programming your Qubino relay. You’ll get additional instructions and step-by-step directions for any installation.

Qubino Z-Wave Plus 1 Relay Switch and Energy Monitor ZMNHAD3. Works with Wink, SmartThings, Vera, and More. Compact Design, the Smallest in the U.S.

Qubino Z-Wave Plus 1 Relay Switch and Energy Monitor ZMNHAD3. Works with Wink, SmartThings, Vera, and More. Compact Design, the Smallest in the U.S.

    Features:

  • WHAT DOES IT DO? Install it behind your wall switch for Z-Wave wireless control. Great for lights, exhaust fans, or ceiling fans up to 10 Amps.
  • WHAT ELSE DO I NEED? Check for NEUTRAL wire in the electrical box (VERY IMPORTANT). You’ll need a Z-Wave hub for wireless control. Basic on/off functionality will work on any Z-Wave hub (NOT Z-Wave alarm panels) but you’ll need a compatible hub for advanced features and energy reports (scroll down for details). Your smart speaker is NOT a Z-Wave hub.
  • WHY NOT GET A WALL SWITCH? So you can keep your favorite toggles or specially designed switches on the wall without having to compromise for the limited style options of Z-Wave wall switches. Connect Qubino’s digital temperature sensor (sold separately) to get additional functionality of a hard-wired thermometer.
  • HOW IS IT BETTER? Made in Italy from top quality components that will last. If your Z-Wave hub support energy monitoring (Wink and alarm panels DON’T), you’ll be able to track power for the device connected to the relay. Set up the built-in timer for the relay to automatically turn off after being in use for too long. It will also remember and restore the on/off status after power failure.
  • IS THERE TECH SUPPORT? Yes! You can always contact the seller or manufacturer for help with wiring or programming your Qubino relay. You’ll get additional instructions and step-by-step directions for any type of installation.

Qubino Z-Wave Plus Shutter Motor Controller ZMNHOD3 for Motorized Blinds and Shades, 12-24 VDC Motors Only

Qubino Z-Wave Plus Shutter Motor Controller ZMNHOD3 for Motorized Blinds and Shades, 12-24 VDC Motors Only

    Features:

  • WHAT DOES IT DO? Install it behind your momentary (push-button) wall switch for Z-Wave wireless control of motorized shades, blinds, shutters, or sunscreens. Use it behind a simple on/off switch for basic open/close control and adjust positioning from your smart home app. It calibrates automatically!
  • WHAT ELSE DO I NEED? A 12-24 VDC powered motor to open and close the blinds (for 120 VAC motors go to model ZMNHCD3 – not sure what you have? Contact seller!). Make sure your wall switch is NOT a dimmer. You’ll need a compatible Z-Wave hub to use this device (scroll down for details), like Hubitat, Vera, or Home Center Lite. Does NOT work with Wink or alarm panels. Alexa is NOT a Z-Wave hub.
  • WHY AUTOMATE BLINDS? To keep the sun out when it’s too hot and bring it in when most needed, depending on temperature, time of day, and your personal routine. Save on electrical bills and always wake up to the perfect light, without even thinking about it.
  • HOW IS IT BETTER? It’s made in Italy from high-quality components for extra durability. It’s equipped with a Z-Wave Plus range extender and built-in energy monitor. You can also get temperature reports from the location of the controller if you add the Qubino temperature sensor (sold separately, look for ZMNHEA1).
  • IS THERE TECH SUPPORT? Yes! You can always contact the seller or manufacturer for help with wiring or programming your Qubino controller. You’ll get additional instructions and step-by-step directions for any installation.

Qubino Z-Wave Plus Flush Shutter Motor Controller for Motorized Blinds and Shades ZMNHCD3

Qubino Z-Wave Plus Flush Shutter Motor Controller for Motorized Blinds and Shades ZMNHCD3

    Features:

  • WHAT DOES IT DO? Install it behind your momentary (push-button) wall switch for Z-Wave wireless control of motorized shades, blinds, shutters, or sunscreens. Use it behind a simple on/off switch for basic open/close control and adjust positioning from your smart home app. It calibrates automatically!
  • WHAT ELSE DO I NEED? A 120 VAC powered motor (for 12-24 VDC motors go to model ZMNHOD3) to open and close the blinds. Check for NEUTRAL wire in the switch box (VERY IMPORTANT). Make sure your wall switch is NOT a dimmer. You’ll need a compatible Z-Wave hub to use this device (scroll down for details), like SmartThings, Vera, or Home Center Lite. Does NOT work with Wink or alarm panels. Alexa is NOT a Z-Wave hub.
  • WHY AUTOMATE BLINDS? To keep the sun out when it’s too hot and bring it in when it’s needed, depending on temperature, time of day, and your personal routine. Save on your electrical bill and always wake up to the perfect light, without thinking about it.
  • HOW IS IT BETTER? It’s made in Italy from high-quality components for extra durability. It’s equipped with a Z-Wave Plus range extender and built-in energy monitor. You can also get temperature reports from the location of the controller if you add the Qubino temperature sensor (sold separately, look for ZMNHEA1).
  • IS THERE TECH SUPPORT? Yes! You can always contact the seller or manufacturer for help with wiring or programming your Qubino controller. You’ll get additional instructions and step-by-step directions for any installation.

SHELLY 1 One Relay Switch Wireless WiFi Home Automation iOS Android Application (4 Pack) UL Certified

SHELLY 1 One Relay Switch Wireless WiFi Home Automation iOS Android Application (4 Pack) UL Certified

    Features:

  • OPEN SOURCE – Use the power of Mongoose OS to make your own application. Make your Arduino project live and usable in your automation project. Also, you can share your experience with developers all over the world.
  • 24/7 APPLICATION SUPPORT – Free iOS/Android Shelly Cloud application. You can check your devices status anywhere and anytime. Remotely turn on or off the connected devices.
  • CONTROL APPLIANCES WITH PRE-SET ON-OFF FUNCTION – Control wide range of home appliances with the help of the free Shelly Cloud application. Check your home appliances status anytime and anywhere and control them on and off.
  • WEEKLY SCHEDULING – Create custom daily schedules for your devices.
  • HIGH COMPATIBILITY – Control all your home appliances with your voice. The Shelly 1 OS are Google home and Amazon Echo Compatible.

Qubino Digital Temperature Sensor ZMNHEA1 for Qubino Z-Wave Modules

Qubino Digital Temperature Sensor ZMNHEA1 for Qubino Z-Wave Modules

    Features:

  • Get remote temperature readings with your compatible Qubino Z-Wave Plus modules (Qubino module and Z-Wave hub required, sold separately).
  • Monitor extreme temperatures: -58 to 257 F.
  • Powered by the Qubino Z-Wave module which can use 110 VAC or 24 VDC (great for water temperature monitoring).
  • Quick set-up, it’s ready to join the Qubino Z-Wave module out of the box.
  • 2-year manufacturer warranty.

Qubino ZMNHTD1 Smart Meter, Grey

Qubino ZMNHTD1 Smart Meter, Grey

    Features:

  • Z-Wave plus
  • Power consumption at un: < 2 W
  • Type (connection): single phase (1B)

As an Amazon Associate I earn from qualifying purchases.

Random products:

supersonic record players
salt pigs