NOYITO TXS0102 2-Bit Bidirectional Voltage Level Converter I2C IIC Level Module (Pack of 2)

NOYITO TXS0102 2-Bit Bidirectional Voltage Level Converter I2C IIC Level Module (Pack of 2)

    Features:

  • This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems.
  • It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply.
  • This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
  • When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
  • To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

MING-MCZ Durable 2Bit Bidirectional Voltage Level Converter I2C IIC Digital Switch TXS0102 Easy to Assemble

MING-MCZ Durable 2Bit Bidirectional Voltage Level Converter I2C IIC Digital Switch TXS0102 Easy to Assemble

    Features:

  • Every relay has normally open and normally closed contacts
  • TXS0102 2Bit Bidirectional Voltage Level Converter I2C IIC Digital Switch

Areyourshop 4× CJMCU-0102 TXS0102 2 Bit Bidirectional Voltage Level Converter I2C IIC Switch

Areyourshop 4× CJMCU-0102 TXS0102 2 Bit Bidirectional Voltage Level Converter I2C IIC Switch

    Features:

  • 100% Brand New and High Quality.
  • 1. Type: CJMCU-0102 TXS0102 Board 2. Size: 16mm x 13mm 3. This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems.
  • 4. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. 5. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
  • 6. When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
  • 7. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

DollaTek TXS0102 2 Bit Bidirectional Voltage Level Converter I2C IIC Switch

DollaTek TXS0102 2 Bit Bidirectional Voltage Level Converter I2C IIC Switch

    Features:

  • This two-bit non-inverting converter is a bidirectional voltage converter and can be used to establish digital switching compatibility between mixed voltage systems.
  • Utilizes two distinct configurable power bars, with ports A supporting operating voltages from 1.65V to 3.6V while tracking VCCA power, and ports B supporting operating voltages from 2.3V to 5.5V while tracking VCCB power supply.
  • This enables support for both lower and upper logic signal levels while providing bi-directional translation capability between any voltage node at 1.8V, 2.5V, 3.3V and 5V.
  • When the output enable (OE) input is low, all I / O are placed in the high impedance state, which significantly reduces the quiescent current consumption of the power supply.
  • To ensure the high impedance state when turning on or off, the OE must be connected to GND through a pulldown resistor; the minimum resistor value is determined by the driver’s current sourcing capability.

Fasilei 10pcs/lot TXS0102DCUR TXS0102 VSSOP

Fasilei 10pcs/lot TXS0102DCUR TXS0102 VSSOP

    Features:

  • 10pcs/lot TXS0102DCUR TXS0102 VSSOP new original

Lysee Cable Tools – 10pcs/lot TXS0102DCUR TXS0102 VSSOP

Lysee Cable Tools - 10pcs/lot TXS0102DCUR TXS0102 VSSOP

    Features:

  • Model number: TXS0102DCUR

ffzhushengmy Electronics Module Parts 2Bit Bidirectional Voltage Level Converter I2C IIC Digital Switch TXS0102

ffzhushengmy Electronics Module Parts 2Bit Bidirectional Voltage Level Converter I2C IIC Digital Switch TXS0102

    Features:

  • TXS0102 2Bit Bidirectional Voltage Level Converter I2C IIC Digital Switch

(10PCS) TXS0102DCTR IC VOLT-LVL TRANSL 2BIT BI SM8 0102 TXS0102

(10PCS) TXS0102DCTR IC VOLT-LVL TRANSL 2BIT BI SM8 0102 TXS0102

    Features:

  • Part NO.:TXS0102DCTR
  • Package:SM8
  • Description:IC VOLT-LVL TRANSL 2BIT BI SM8

(10PCS) TXS0102DCUR IC VOLT-LEVEL TRANSLATOR 8-US8 0102 TXS0102

(10PCS) TXS0102DCUR IC VOLT-LEVEL TRANSLATOR 8-US8 0102 TXS0102

    Features:

  • Part NO.:TXS0102DCUR
  • Package:US8
  • Description:IC VOLT-LEVEL TRANSLATOR 8-US8

10PCS TXS0102DCUR TXS0102 VSSOP New Original

10PCS TXS0102DCUR TXS0102 VSSOP New Original

    Features:

  • Tested before shipping.Package reference ♥Reference Weight:0.05kg (0.11lb.)
  • Usually Estimated Delivery Time: 7-24 days(trackable) —– We also provide Expedited Shipping service use DHL or UPS: 2-7 days.(excluding handling time).
  • If the order amount above US $120 in our store, we will use Expedited Shipping service for free.
  • Rare type products provide—–Search keyword or Product model such as”RF cable ” or ” connector” our store ,may you find some Rare type products.. Or no hesitation send the Product model email to us, we will send the link to you directly.
  • We attached great importance to the cooperation with every customer.any question,please feel free to contact me.have a great day!

As an Amazon Associate I earn from qualifying purchases.

Random products:

wampler
ring light for desk