Oatey 39017 SURE-VENT AIR ADM VALVE, 1-1/2-Inch by 2-Inch, White

Oatey 39017 SURE-VENT AIR ADM VALVE, 1-1/2-Inch by 2-Inch, White

    Features:

  • SURE-VENT PVC AIR ADMITTANCE VALVE: Provides the ideal venting solution for island sinks, remote bathroom groups, and remodel jobs by eliminating the need to be connected directly into the stack vent
  • EQUALIZES PRESSURE: Keeps the sewer and atmospheric pressures equalized, allowing water to drain freely
  • ONE-WAY VALVE: Allows air to enter the plumbing drainage system when negative pressures develop without the use of a vent extended to open air and to prevent sewer gases from escaping into the building
  • SENSITIVE TO PRESSURE CHANGES: Closes by gravity and seals the vent terminal at zero differential pressure (no flow conditions) and under positive internal pressures
  • SPECIFICATIONS: 1.5″ x 2″ size is approved to handle up to 3″ vent pipe and has a 20 DFU (Drainage Fixture Unit) capacity, and complies to ASSE (American Society of Safety Engineers) Standard 1050 and 1051 for use a secondary vent

Broan 655F Finish Pack. Heater/Fan/Light Assembly and Grille, 100W Light, 1300W Heater, 70 CFM

Broan 655F Finish Pack. Heater/Fan/Light Assembly and Grille, 100W Light, 1300W Heater, 70 CFM

    Features:

  • 70 CFM, 4.0 Sones
  • 100W fan light
  • 1300W heater
  • Uses 654H Housing Pack
  • Fits 2″x6″ ceiling construction

Dorman 46019 EGR Pressure Feedback Hose for Select Ford / Lincoln / Mercury Models, 2 Pack

Dorman 46019 EGR Pressure Feedback Hose for Select Ford / Lincoln / Mercury Models, 2 Pack

    Features:

  • Direct replacement – this EGR pressure feedback hose is designed to match the fit and function of the original hose on specified vehicles
  • Restores functionality – reliable replacement for an original hose that has failed due to pressure, heat and cracking
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

Dorman 626-540 HVAC Heater Hose Assembly for Select Ford / Lincoln Models

Dorman 626-540 HVAC Heater Hose Assembly for Select Ford / Lincoln Models

    Features:

  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

Dorman 911-104 Vapor Canister Vent Solenoid for Select Ford / Lincoln / Mercury Models

Dorman 911-104 Vapor Canister Vent Solenoid for Select Ford / Lincoln / Mercury Models

    Features:

  • Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment function at a lower price
  • Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

Dorman 911-061 Fuel Tank Vent Valve for Select Ford/Lincoln Models

Dorman 911-061 Fuel Tank Vent Valve for Select Ford/Lincoln Models

    Features:

  • A necessary safety item–prevents gas from spilling out of your tank in the event of an accident
  • Direct replacement for a proper fit every time
  • Durable plastic construction
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Garage
  • fit type: Vehicle Specific

Dorman 973-444 HVAC Blower Motor Resistor Kit for Select Ford / Lincoln / Mercury Models

Dorman 973-444 HVAC Blower Motor Resistor Kit for Select Ford / Lincoln / Mercury Models

    Features:

  • Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
  • Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs
  • Restores functionality – made to perform like original equipment to restore full HVAC operation
  • Trustworthy quality – backed by team of engineers and quality specialists in the USA
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

Dorman 911-260 Evaporative Emissions System Pressure Sensor for Select Ford / Lincoln / Mercury Models

Dorman 911-260 Evaporative Emissions System Pressure Sensor for Select Ford / Lincoln / Mercury Models

    Features:

  • Stops and prevents rough idle
  • Replacement shuts off the “check engine light”
  • Restores fuel efficiency
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

Dorman 911-378 Vapor Canister Purge Valve for Select Ford / Lincoln Models

Dorman 911-378 Vapor Canister Purge Valve for Select Ford / Lincoln Models

    Features:

  • Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

Universal Air Gap for Water Softeners and Filters with 1/2-inch OD or 5/8-inch ID Inlet Port and 1-1/2-inch or 2-inch Drainpipe Outlet (AG100-001, Mr. Drain, 34700)

Universal Air Gap for Water Softeners and Filters with 1/2-inch OD or 5/8-inch ID Inlet Port and 1-1/2-inch or 2-inch Drainpipe Outlet (AG100-001, Mr. Drain, 34700)

    Features:

  • ❤ EASY TO CONNECT: Mr. Drain air gap (AG100-001) has 1/2-inch OD inlet port for direct 1/2-inch PVC pipe connection. The 1/2-inch inlet accommodates any 1/2-inch slip joint adapters. The adapters include a threaded end, barb connection, and a quick connect for PEX tubing. Also, the inlet accommodates 5/8-inch OD tubing that can be directly inserted into the inlet. For tubing to stay in place, it needs to be attached to a support structure within 12-18 inches from the inlet port.
  • ❤ STANDPIPE CONNECTION: Mr. Drain air gap (AG100-001) inserts directly into the 1-1/2-inch and 2-inch standpipes. The body of the air gap provides stops to assure secure placement. This air gap can be used with plastic or metal standpipes. If needed, it can be glued in place with plastic standpipes using regular PVC adhesive. The air gap outlet is designed to pass up to 15 gallons per minute. The optimum recommended flow rate is 7 gallons per minute.
  • ❤ SPLASH PROTECTION: The AG100-001 air gap uses splash guards to assure a completely dry operation. Splash guards are an integral part of the design and can be seen through the side air gap window. During water softener operation, an initial discharge surge can create splashing. Splash shield eliminates the possibility of water splashing outside of the air gap. When designing drainage for an air gap, makes sure that P-trap is located minimum 20-inches from the top of the standpipe.
  • ❤ QUIET OPERATION: When water exits the air gap, depending on the design, it may flow directly into a P-trap. This can create splashing noise that may be objectionable. To avoid excessive noise, it is recommended to use 22 degrees elbow inline with standpipe to avoid direct drainage to P-trap. The pipe elbow should be located at least 12 inches from the air gap to eliminate splashback. If an elbow is not an option for your application, we can provide a flow deflector.
  • ❤ CERTIFICATION: The AG100-001 is legal to install in any state. It is UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code) and NSF (National Sanitation Foundation) tested. These certifications assure that every product is safe to use. Also, all of the products are tested for strength and to make sure that every glue joint will withstand at least 40lb of force and not break. The testing is conducted for every manufactured lot to ensure consistent performance.

As an Amazon Associate I earn from qualifying purchases.

Random products:

lluvia de amor decoration
llqma