Dinosaur Electronics UIB64 Ignition Board

Dinosaur Electronics UIB64 Ignition Board

    Features:

  • Dinosaur Electronics UIB 64 Ignitor Board
  • TEI Certified
  • 12 VDC Operation, Fuse & Surge protected
  • Size: 3.25″ x 4.25″
  • 3 Diagnostic LEDs

Dinosaur Electronics SMALLCOVER Small Cover for Universal Igniter Board

Dinosaur Electronics SMALLCOVER Small Cover for Universal Igniter Board

    Features:

  • MISC Ignitor Board Cover- Smal Small Cover Dinosaur Electronics Inc
  • Small cover for Small (3.25″x4.25″) ignitor boards.
  • External measurements are 4.5″ x 3.5″ x 2″. Fits 3.25″x4.25″ small boards.

Dinosaur Electronics (Fan 50 Plus PINS Ignitor Board

Dinosaur Electronics (Fan 50 Plus PINS Ignitor Board

    Features:

  • This board can also be used to upgrade older furnaces to add the Fan Control feature
  • The basic purpose of a Fan Control Ignitor Board is to shut the fan motor off if the board fails to sense a flame after the third ignition try
  • Battery drain is reduced and the needless blowing of cold air is eliminated
  • The FAN 50 Plus Pins

BLACK+DECKER 20V Max Cordless Drill / Driver with 30-Piece Accessories (LD120VA)

BLACK+DECKER 20V Max Cordless Drill / Driver with 30-Piece Accessories (LD120VA)

    Features:

  • Cordless drill with Lithium Ion Battery that is always ready and holds a charge up to 18 months
  • The 24 position clutch of this power drill prevents stripping and overdriving screws by providing extra level of control
  • Drill/driver with soft grip handle provides added comfort during use
  • Assortment of 30 accessories to help you get the job done
  • Part of the 20V max System – A System that demands attention

Dinosaur Electronics (UIB S) Small Universal Ignitor Board

Dinosaur Electronics (UIB S) Small Universal Ignitor Board

    Features:

  • DUAL SENSE – Flame sense works through high voltage connector and edge connector simultaneously
  • EXTERNAL SENSE -Connector on the board for external sense wire
  • DIAGNOSTIC-AID LED on board is green to show power to board
  • Red to indicate power to gas valve
  • VOLTAGE REGULATOR -Cleans up the 12 Volt supply power
  • Size: 3.25 x 4.25 Inches, Fuse & Surge protected, Microcontrolled.

RV Water Heater Circuit Board Replacement 91365 | Water Heater Replacement Parts

RV Water Heater Circuit Board Replacement 91365 | Water Heater Replacement Parts

    Features:

  • COMPATIBLE WITH WATER HEATERS: Models GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E. Atwood part #93309 (edge pin connector) NOT included.
  • Dimensions: 4 1/4” x 3 3/8” x 1”
  • 12V DC
  • NEWEST MODEL: Replaces Atwood 93851.
  • Does not include adapter

Atwood 91365 Circuit Board Kit for Water Heaters – Use with Gas/Electric 12 VDC

Atwood 91365 Circuit Board Kit for Water Heaters - Use with Gas/Electric 12 VDC

    Features:

  • NEWEST MODEL: Replaces Atwood 93851.
  • COMPATIBLE WITH WATER HEATERS: Models GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, GCH10A-4E.
  • COMBO BOARD: Controls BOTH the LP ignition and the Electric Element. Atwood part #93309 (edge pin connector) NOT included.
  • TECHNICAL SUPPORT: Atwood provides prompt support in diagnosing and resolving technical problems.

Atwood 91504 Universal Ignition Control

Atwood 91504 Universal Ignition Control

    Features:

  • 91504

RV Water Heater Circuit Board Replacement 91367 | Water Heater Replacement Parts

RV Water Heater Circuit Board Replacement 91367 | Water Heater Replacement Parts

    Features:

  • Compatible with: G6A-6E, G6A-7E, G6A-8E, GH6-6E, GH6-7E, GH6-8E, G10-1E, GH10-1E, G10-2E G10-3E, G6A-2E, GH6-3E, GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E
  • Dimensions: 4 1/4” x 2 5/8” x 1”
  • 12V DC
  • Does not include adapter

Dinosaur Electronics (UIB 24VAC 24V Ignitor Board for Furnaces

Dinosaur Electronics (UIB 24VAC 24V Ignitor Board for Furnaces

    Features:

  • Hydro-Flame and Suburban
  • Features: Fuse Protection-a fuse on the board protects the board’s 24 Volt circuits from short-circuit damage
  • Dual Sense-flame sense works through high-voltage connector and edge connector simultaneously
  • Diagnostic-aid LED on board is green to show power on board
  • Red to indicate power to gas valve

As an Amazon Associate I earn from qualifying purchases.

Random products:

hotels in Kato
hotels in Sindia